Jump to content

User:Int 80h/files/DOS 6.22 NET WATTCP.CFG

From Wikipedia, the free encyclopedia

WATTCP.CFG

[edit]

WatCom configuration file, usually found in C:\NET\TOOLS.

This is a shortened version, without any commends and only enabled options.

pkt.vector   = 0x60 ; optional
my_ip        = dhcp
netmask      = $(NETMASK)
gateway      = $(REMIP)
domain_to    = 0   ; optional
dynamic_host = 0   ; optional
sockdelay    = 90  # increase delay from default of 30 seconds
inactive     = 0   ; optional
datatimeout  = 120 ; optional
debug        = 0   ; optional
mss          = 512 ; optional
mtu          = 552 ; optional
mtu_disc     = 0   ; optional
ip6.my_ip    = ::FFFF:$(MYIP) ; mandatory

# advanced options

debug.file   = wattcp.dbg ; optional
debug.filter = all
debug.proto  = arp/rarp/ip/udp/tcp/icmp/igmp
debug.mode   = all
debug.stat   = 1 ; optional
debug.dns    = 1 ; default is 1
debug.rtp    = 1 ; default is 1

sk_debug.device   = wattcp.sk
sk_debug.openmode = w+ ; default

bind.hostaliases = $(HOSTALIASES) ; optional
bind.red_options = $(RES_OPTIONS) ; optional

syslog.file  =     ; optional
syslog.host  =     ; optional
syslog.port  = 514 ; optional
syslog.level = emerg/alert/error ; optional

tftp.boot_file =   ; optional
tftp.server    =   ; optional
tftp.timeout   = 8 ; optional
tftp.retry     = 5 ; optional
tftp.mode      = octet ; optional
tftp.port      = 0 ; optional

echo.daemon = 0
echo.host   = 255.255.255.255
echo.port   = 7

discard.daemon = 0
discard.host   = 255.255.255.255
discard.port   = 9

# configuration of wattcp programs

talk.localuser  = <your signature/handle>
talk.screenmode = autocr,split
talk.colors     = 1E,1A,71,71,71
talk.alias      = joe:joe@some.domain.com
talk.logfile    = $(WATTCP.CFG)\talk\talk.log
talk.message    = "%s is busy. Try again later.\n"

snuz.tmpdir = $(TEMP)
snuz.tc     = $(ETC)\news\snuz.rc
snuz.active = $(ETC)\news\active
snuz.host   = news.server.com
snuz.from   = joe@some.domain.com
snuz.editor = edit.com
snuz.smtp   = "popmail send %H %D %f"

smbpd.workgroup    = "my-work-group"
smbpd.printer1name = "my-printer-at-lpt1"
smbpd.printer2name = "my-printer-at-lpt2"
smbpd.printer3name = "my-printer-at-lpt3"

smtp.subdir   = $(ETC)\smtpd\mail\
smtp.sessions = 8

snmp.mibfile  = $(snmp)\mib.txt
snmp.mib2file = $(snmp)\mib-v2.txt