User:Raduran/sandbox

This is the user sandbox of Raduran. A user sandbox is a subpage of the user's user page. It serves as a testing spot and page development space for the user and is not an encyclopedia article. Create or edit your own sandbox here.

Other sandboxes: Main sandbox | Template sandbox

Finished writing a draft article? Are you ready to request review of it by an experienced editor for possible inclusion in Wikipedia? Submit your draft for review!

The Electromechanical film (EMFi) is a thin, cell, biaxially situated polypropylene film covered with metal electrodes.

Manufacturing

An EMFi has two possible purposes. It can function as an actuator or a sensor. The two basic types that have been manufactured were given the labels O01 (37 μm thick) and HS01 (70 μm thick). The electromechanical coefficient, k_s, for O01 is 30 pCN^-1 and HS01 has a coefficient of 170 pCN^-1. Upon applying an external voltage, the EMFi operates as an actuator and its effectiveness is dependent on variation in thickness and the films motion in an air gap. ^[1]

An EMFi is charged by using the corona method, which uses two electric fields to surpass the films dielectric capacity. During the charging process using the corona method, there is an occurrence of electric breakdowns in the voids that lead to charged polypropylene/air interfaces. ^[1]

Some models of the EMFi that have only one air gap are believed to function as a sensor.

References

^ ^a ^b "Modelling the electromechanical film (EMFi)". Journal of Electrostatics. 48 (3–4): 193–204. 2000-03-01. doi:10.1016/S0304-3886(99)00065-0. ISSN 0304-3886.

[:0-1] "Modelling the electromechanical film (EMFi)". Journal of Electrostatics. 48 (3–4): 193–204. 2000-03-01. doi:10.1016/S0304-3886(99)00065-0. ISSN 0304-3886.

[1]