Jump to content

User:Vstevenson96/sandbox

From Wikipedia, the free encyclopedia

Our CBE 195 Group is going to do Membrane Gas Separations, our combined edits for the page can be seen on JoseZZ's sandbox:

https://en.wikipedia.org/wiki/User:JoseZZ/sandbox

 CCS Final Project Draft[edit]

Background[edit]

Today, membranes are used for commercial separations involving: N2 from air, H2 from ammonia in the Haber-Bosch process, natural gas purification, and tertiary-level Enhanced Oil Recovery supply.[1]

Single-stage membrane operations involve a single membrane with one selectivity value. Single-stage membranes were first used in natural gas purification, separating CO2 from methane.[1] A disadvantage of single-stage membranes is the loss of product in the permeate due to the constraints imposed by the single selectivity value. Increasing the selectivity reduces the amount of product lost in the permeate, but comes at the cost of requiring a larger pressure difference to process an equivalent amount of a flue stream. In practice, the maximum pressure ratio economically possible is around 5:1.[2]

To combat the loss of product in the membrane permeate, engineers use “cascade processes” in which the permeate is recompressed and interfaced with additional, higher selectivity membranes.[1] The retentate streams can be recycled, which achieves a better yield of product.

Need for multi-stage process[edit]

Single stage membranes devices are not feasible for a high concentration in the permeate stream. This is due to the pressure ratio limit that is economically unrealistic to exceed. Therefore, the use of multi stage membranes is required to concentrate the permeate stream. The use of a second stage allows for less membrane area and power to be used. This is because of the higher concentration that passes the second stage, as well as the lower volume of gas for the pump to process.[2][3] Other factors, such as adding another stage that uses air to concentrate the stream further reduces cost by increasing concentration within the feed stream.[3] Additional methods such as combining multiple types of separation methods allow for variation in creating economical process designs.

Membrane Use in Hybrid Processes[edit]

Hybrid processes have long standing history with gas separation.[1]  Typically, membranes are integrated into already existing processes such that they can be retrofitted into already existing carbon capture systems.

MTR and UT Austin have worked to create hybrid processes, utilizing both absorption and membranes, for CO2 capture.  First, an absorption column using piperazine as a solvent absorbs about half the carbon dioxide in the flue gas, then the use of a membrane results in 90% capture.[4] A parallel setup is also, with the membrane and absorption processes occurring simultaneously.  Generally, these processes are most effective when the highest content of carbon dioxide enters the amine absorption column. Incorporating hybrid design processes allows for retrofitting into fossil fuel power plants.[4]

Hybrid processes can also use cryogenic technology in membranes.[5]  For example, hydrogen and carbon dioxide can be separated, first using cryogenic gas separation, whereby most of the carbon dioxide exits first, then using a membrane process to separate the remaining carbon dioxide, after which it is recycled for further attempts at cryogenic separation.[5]

Cost Analysis of Current Membrane Technology for CO2 Capture Relative Well Established CCS Techniques[edit]

Cost limits the pressure ratio in a membrane CO2 separation stage to a value of 5; higher pressure rations eliminate any economic viability for CO2 capture using membrane processes.[3][6]  Recent studies have demonstrated that multi-stage CO2 capture/separation processes using membranes can be economically competitive with older and more common technologies such as amine-based absorption.[3][5] Currently, both membrane and amine-based absorption processes can be designed to yield a 90% CO2 capture rate. [7][3][6][8][4][5] For carbon capture at an average 600 MW coal-fired power plant, the cost of CO2 capture using amine-based absorption is in the $40-100 per ton of CO2 range, while the cost of CO2 capture using current membrane technology (including current process design schemes) is about $23 per ton of CO2.[3] Additionally, running an amine-based absorption process at an average 600 MW coal-fired power plant consumes about 30% of the energy generated by the power plant, while running a membrane process requires about 16% of the energy generated.[3] CO2 transport (e.g. to geologic sequestration sites, or to be used for EOR) costs about $2-5 per ton of CO2.[3]This cost is the same for all types of CO2 capture/separation processes such as membrane separation and absorption.[3] In terms of dollars per ton of  captured CO2, the least expensive membrane processes being studied at this time are multi-step counter-current flow/sweep processes.[7][3][6][8][4][5]

  1. ^ a b c d Bernardo P., Clarizia G. "30 Years of Membrane Technology for Gas Separation" (PDF). The Italian Association of Chemical Engineering. 32 (2013). S2CID 6607842.
  2. ^ a b Baker, Richard W. (2002-03-01). "Future Directions of Membrane Gas Separation Technology". Industrial & Engineering Chemistry Research. 41 (6): 1393–1411. doi:10.1021/ie0108088. ISSN 0888-5885.
  3. ^ a b c d e f g h i j Merkel, Tim C.; Lin, Haiqing; Wei, Xiaotong; Baker, Richard (2010-09-01). "Power plant post-combustion carbon dioxide capture: An opportunity for membranes". Journal of Membrane Science. Membranes and CO2 Separation. 359 (1–2): 126–139. doi:10.1016/j.memsci.2009.10.041.
  4. ^ a b c d Brice Freeman, Pingjiao Hao, Richard Baker, Jay Kniep, Eric Chen, Junyuan Ding, Yue Zhang Gary T. Rochelle. "Hybrid Membrane-absorption CO2 Capture Process - ScienceDirect". www.sciencedirect.com. Retrieved 2017-04-28.{{cite web}}: CS1 maint: multiple names: authors list (link)
  5. ^ a b c d e Lin, Haiqing; He, Zhenjie; Sun, Zhen; Kniep, Jay; Ng, Alvin; Baker, Richard W.; Merkel, Timothy C. (2015-11-01). "CO2-selective membranes for hydrogen production and CO2 capture – Part II: Techno-economic analysis". Journal of Membrane Science. 493: 794–806. doi:10.1016/j.memsci.2015.02.042.
  6. ^ a b c Huang, Yu; Merkel, Tim C.; Baker, Richard W. (2014-08-01). "Pressure ratio and its impact on membrane gas separation processes". Journal of Membrane Science. 463: 33–40. doi:10.1016/j.memsci.2014.03.016.
  7. ^ a b Brunetti, A.; Scura, F.; Barbieri, G.; Drioli, E. (2010-09-01). "Membrane technologies for CO2 separation". Journal of Membrane Science. Membranes and CO2 Separation. 359 (1–2): 115–125. doi:10.1016/j.memsci.2009.11.040.
  8. ^ a b Hao, Pingjiao; Wijmans, J. G.; Kniep, Jay; Baker, Richard W. (2014-07-15). "Gas/gas membrane contactors – An emerging membrane unit operation". Journal of Membrane Science. 462: 131–138. doi:10.1016/j.memsci.2014.03.039.

Description:

We will describe the effects of changing the pressure ratio on the process, and how selectivity alone does not allocate the proper carbon dioxide separation.  Energy costs alone, though, makes operating the pressure difference under close to vacuum conditions not feasible. We will describe the CO2 separation process designed by Dr. Baker’s works that makes membranes be competitive with absorption and adsorption technologies. We will discuss the advantages of process design in making membrane separation economical.  For example, considering applications of appropriate contact area between phases.  Also, we need to consider the use of multiple membranes, configured with streams going into many different pressure changes to optimize carbon dioxide separation.Methods in which to increase carbon dioxide concentration to maximize driving force. We will also explain the current status of CO2 capture with membranes in terms of research, feasibility, and implementation.

Bibliography:

  1. Brunetti, A.; Scura, F.; Barbieri, G. Membrane technologies for CO2 separation. Journal of Membrane Science 359 (2010) 115–125.
  2. Baker, Richard W. Future Directions of Membrane Gas Separation Technology. Ind. Eng. Chem. Res. 2002, 41, 1393-1411.
  3. Merkel, Tim C.; Lin, Haiqing; Wei, Xiaotong; Baker, Richard W. Power plant post-combustion carbon dioxide capture: An opportunity for membranes.Journal of Membrane Science 359 (2010) 126–139.
  4. Huang, Yu; Merkel, Tim C.; Baker, Richard W. Pressure ratio and its impact on membrane gas separation processes. Journal of Membrane Science 463 (2014) 33–40.
  5. Hao, Pingjiao; Wijmans, J.G.; Kniep, Jay; Baker, Richard W. Gas/gas membrane contactors - An emerging membrane unit operation. Journal of Membrane Science 462 (2014) 131–138.
  6. Brice Freemana, Pingjiao Haoa, Richard Bakera, Jay Kniepa, Eric Chenb, Junyuan Dingb, Yue Zhangb, Gary T. Rochelle. Hybrid Membrane-absorption CO2 Capture process. Energy Procedia 63 (2014) 605 – 613.
  7. Haiqing Lin, Zhenjie He, Zhen Sun, Jay Kniep, Alvin Ng, Richard W. Baker, Timothy C. Merkel. CO2-selective membranes for hydrogen production and CO2 capture – Part II: Techno-economic analysis.Journal of Membrane Science 493 (2015) 794–806