Jump to content

User talk:Blast furnace chip worker

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

Welcome

[edit]

Hello, Blast furnace chip worker, and welcome to Wikipedia. Thank you for your contributions. I hope you like the place and decide to stay. If you are stuck, and looking for help, please come to the New contributors' help page, where experienced Wikipedians can answer any queries you have! Or, you can just type {{helpme}} and your question on this page, and someone will show up shortly to answer. Here are a few good links for newcomers:

We hope you enjoy editing here and being a Wikipedian! By the way, you can sign your name on talk and vote pages using four tildes, like this: ΔT The only constant 14:03, 24 June 2011 (UTC). If you have any questions, see the help pages, add a question to the village pump or ask me on my talk page. Again, welcome! -- PBS (talk) 20:48, 13 March 2011 (UTC)[reply]

Your recent edits

[edit]

Hello. In case you didn't know, when you add content to talk pages and Wikipedia pages that have open discussion, you should sign your posts by typing four tildes ( ~~~~ ) at the end of your comment. You could also click on the signature button located above the edit window. This will automatically insert a signature with your username or IP address and the time you posted the comment. This information is useful because other editors will be able to tell who said what, and when. Thank you. --SineBot (talk) 18:45, 14 March 2011 (UTC)[reply]

Here is the full history of the article Madeley Wood Company -- I did not rename it. I suggest that if you have any questions about the article that you post a message on the talk page of Peterkingiron who is a major contributor to that article. -- PBS (talk) 20:48, 13 March 2011 (UTC)[reply]

OK further investigaion, leads me to understand your confusion (and mine): In 2006, I created a redirect from Bedlam Furnace to Madeley Wood Company, but I did not rename the article. -- PBS (talk) 20:53, 13 March 2011 (UTC)[reply]

Because I created a redirect does not make me an expert on this company. I have posted a message to user talk:Peterkingiron he is far more likely to be able to answer your questions than I am. -- PBS (talk) 18:15, 14 March 2011 (UTC)[reply]

OK I've done some Google searching. Before I started there were two possible origins that I could see for the origins of the name bedlam. The first was that there is a place in Shropshire called Bedlam and Wikiepdua has an article on it: Bedlam, Shropshire and it was possible there was a link, but this was unlikely as they were half a county away from each other. However a Google search on ["Bedlam Furnace" name] returned a page Secret Shropshire - Bedlam furnace I refined the search to ["Bedlam Furnace" lunatic] and searched Google Books. It returns what I think is a reliable source and a good explanation for the term "Bedlam Furnace":

Jonathan Andrews (1997). The history of Bethlem (illustrated ed.). Routledge. pp. 5, 6: footnote 3. ISBN 9780415017732. The great water-colourist John Sell Cotman pained the Bedlam Furnace near Madeley in the Severn Gorge; ... the Methodist preacher John Fletcher of Madeley was famous for his millennial prophesies saying 'our earth's the bedlam of the universe, where reason (undiseas'd in heaven) runs mad' ... For further examples of metaphoric, proverbial and jesting uses of the term ....

So form that sources it seems to me that the name "Bedlam Furnace" is metaphoric (the place appeared to the painter to resemble a lunatic asylum), and simultaneously a jest at the expense of Fletcher of Madeley (1729–1785) by Cotman (1782–1842). Well "you live and lean!"-- PBS (talk) 13:31, 15 March 2011 (UTC)[reply]

{{helpme}}


About pronunciation of the word "Bonawe"

Would you like to say me how to pronounciate the name of the hamlet of Bonawe? Which variant is the correct? [boneɪw] or [bonɔː]? And one another quation yet. How to pronunciate the Scottish Gaelic name of this settlement which is written by Englis as Bun Abha, [bʌn ʌbʌ] or [bʌn æbə] or any how else? I need this information beacose I want to write an article about Bonawe and its Furnase on my native language.

It's a good question but not well suited to a helpme request, which calls random people who answer questions to your page without any reason to think they would have particular expertise with Gaelic pronunciation. I suggest you head over to the language section of the reference desk. Cheers.--Fuhghettaboutit (talk) 18:39, 28 March 2011 (UTC)[reply]
I am a native speaker but of American English, so I don't think how I would pronounce it really would help you at all (Scottish English and American English are pronounced quite differently—so much so, that many Americans have trouble understanding at all someone with what they would call a "thick Scottish accent", though, of course, what is a "thick accent" is always relative to the speaker). Also, I have no understanding of IPA, so I would just be typing to the best of my phonetic spelling, which probably doesn't work well unless the person seeing it is also a native English speaker. Well, for what it's worth, bahn-uh-way.--Fuhghettaboutit (talk) 22:51, 28 March 2011 (UTC)[reply]

Your recent edits

[edit]

Hello. In case you didn't know, when you add content to talk pages and Wikipedia pages that have open discussion, you should sign your posts by typing four halfwidth tildes ( ~~~~ ) at the end of your comment. You could also click on the signature button located above the edit window. This will automatically insert a signature with your username or IP address and the time you posted the comment. This information is useful because other editors will be able to tell who said what, and when. Thank you. --SineBot (talk) 19:29, 28 March 2011 (UTC)[reply]

Bonawe

[edit]

In (Scottish Standard) English I'd say [bonɔː]. I'm afraid my Gaelic is about zero. User:MacRusgail will probably know. Angus McLellan (Talk) 21:56, 28 March 2011 (UTC)[reply]

I answered you on my talk page mate! Akerbeltz (talk) 14:49, 29 March 2011 (UTC)[reply]
Might as well copy and paste-...
Hiya. Well, how you pronounce it in English depends on the accent, there are some pretty radical difference between Scottish English and Southern English. In Scottish English it would be /bon'ɔː/ (stress on the second syllable). The Gaelic is easier ;) That's [pun'a.ə] in close transcription. Hope that helps. Akerbeltz (talk) 14:49, 29 March 2011 (UTC)[reply]
Way not write this careful information in the article Bonawe? What's wrong with a doing of this? Transcription of the word "Bonawe" in the article Bonawe will be very careful information for foreing people who is reading this article. And two quations yet.
Do you know what does mean the word "Bonawe"?
Is the pronunciation [boneɪw] acceptable (permissible) too? Is the pronounciation bahn-uh-way (I read this like [bʌn-ʌ-wei ]) correctly too? Are all these variants permissibles or not? Blast furnace chip worker (talk) 15:46, 29 March 2011 (UTC)[reply]

Ok, the easy one's first. I just can't be on every page at the same time :) Next... the meaning is "mouth of the (river) Awe", tha Gaelic word bun (literally "base") is translated as "mouth" when talking about a river.

Assuming you're talking about the English pronunciation: [boneɪw] no, bahn-uh-way no and [bʌn-ʌ-wei] no again. Most place names which are derived from Gaelic broadly speaking mirror the Gaelic pronunciation, though usually not very accurately. In other terms, the normal rules of pronunciation almost never apply to Gaelic derived placenames, which is why all of your three suggestions are totally wrong. That aside, you were parsing the name wrong (which is understandable of course), it's bon + awe, not bon + a + we.

PS I just notices it was Fuhgettaboutit who suggested bahn-uh-way - it's still wrong though. It's a common problem, not only in Scotland, that placenames derived from a 3rd language are often very very hard for non-locals. In turn, place-names like Michigan, Massachustetts or Biloxi are confusing to people on this side of the Atlantic, as they're derived from native american words. Akerbeltz (talk) 17:11, 29 March 2011 (UTC)[reply]

Thank you for your exhaustive answer. It was interesting and careful information. Blast furnace chip worker (talk) 17:26, 29 March 2011 (UTC)[reply]

Your're welcome! Akerbeltz (talk) 17:32, 29 March 2011 (UTC)[reply]

"Bh" is never pronounced as "b", it has the same relationship "ph" has to "p" in English, i.e. "bh" = "v" (sometimes "w"), and "ph" in English is pronounced "f". I second Akerbeltz's comments.--MacRusgail (talk) 17:40, 29 March 2011 (UTC)[reply]

Yeah, I understand what you are talking about. You mean Bun Abha is not equivalent to the [bʌn ʌbʌ] or [bʌn æbə]. Akerbeltz have already explained to me that the Gaelic pronunciation of the word Bun Abha is pun'a.ə But now there remains to undestend one thing yet, why we have to pronunciate pun'a.ə but not pun'apə? Blast furnace chip worker (talk) 18:15, 29 March 2011 (UTC)[reply]

Because in some cases, intervocalic bh, dh, gh, mh, th in Gaelic can represent hiatus :) Akerbeltz (talk) 19:46, 29 March 2011 (UTC)[reply]

Hi. I have reverted your change to the page because on Wikipedia we follow Naming conventions which establish how we are supposed to transliterate names on the English Wikipedia. There is a Romanization of Ukrainian policy here as well, and we use it to correctly transliterate the Ukrainian "в" as "v." The method you use is more reminiscent of Polish and not of Ukrainian. This policy is an established consensus between editors as to how the Ukrainian language is to be transliterated. --ddima/talk 00:02, 24 June 2011 (UTC)[reply]

June 2011

[edit]

Thank you for contributing to Wikipedia. We always appreciate when users upload new images. However, it appears that one or more of the images you have recently uploaded or added to an article may fail our non-free image policy. Most often, this involves editors uploading or using a copyrighted image of a living person. For other possible reasons, please read up on our non-free image criteria. Please note that we take very seriously our criteria on non-free image uploads, and users who repeatedly upload or misuse non-free images may be blocked from editing. If you have any questions, please ask them at the Media Copyright Questions page. ΔT The only constant 14:03, 24 June 2011 (UTC)[reply]

Replaceable fair use File:Ukrainian blast furnace.jpg

[edit]

Thanks for uploading File:Ukrainian blast furnace.jpg. I noticed the description page specifies that the media is being used under a claim of fair use, but its use in Wikipedia articles fails our first non-free content criterion in that it illustrates a subject for which a freely licensed media could reasonably be found or created that provides substantially the same information or which could be adequately covered with text alone. If you believe this media is not replaceable, please:

  1. Go to the media description page and edit it to add {{di-replaceable fair use disputed}}, without deleting the original replaceable fair use template.
  2. On the image discussion page, write the reason why this image is not replaceable at all.

Alternatively, you can also choose to replace this non-free media by finding freely licensed media of the same subject, requesting that the copyright holder release this (or similar) media under a free license, or by taking a picture of it yourself.

If you have uploaded other non-free media, consider checking that you have specified how these images fully satisfy our non-free content criteria. You can find a list of description pages you have edited by clicking on this link. Note that even if you follow steps 1 and 2 above, non-free media which could be replaced by freely licensed alternatives will be deleted 2 days after this notification (7 days if uploaded before 13 July 2006), per our non-free content policy. If you have any questions please ask them at the Media copyright questions page. Thank you. Hammersoft (talk) 14:12, 24 June 2011 (UTC)[reply]

Coalbrookdale

[edit]

I doubt that you will be able to get at most of what has been been written recently on Coalbrookdale without access to a good library that stocks the relevant periodicals, membership of the relevant Societies, or a willingness to spend significant money on "pay for view" on the Newcomen and Economic History Societies' websites:

  • Articles by me and others in Footprints of industry (BAR British Series 2010). I sought to ensure that the unfilled gaps in the history appeared there
  • My 'Sir Clement Clerke and the Adoption of Coal in Metallurgy' Trans. Newcomen Soc. 73(1) (2001-2), 33-52.
  • My 'Dud Dudley's contribution to metallurgy' Hist. Metall. 36(1) (2002), 43-53.
  • My 'The choice of fuel in the 18th century iron industry: The Coalbrookdale accounts reconsidered' Economic History Review 64 (1) (2011), 132–156.

The relationship between Dud Dudley and Abraham Darby was discovered by Carl Higgs. The full version of this is on the Black Country Society website. I would be able to provide an electronic offprint of my EcHR article, but would need you to contact me by e-mail; also (I think) Footprints of industry. Peterkingiron (talk) 14:50, 10 July 2011 (UTC)[reply]

Which date of the race is correct?

[edit]

{{helpme}} There are many links that containing several different dates of the race between Tom Thumb (locomotive) and the horse. Wich date is correct August 18 1830 [1] [2] [3] or September 18 1830 [4] [5] or August 25 1829 [6]? If August 25 1829 is not the date of the race then there is a mistake in Wikipedia here http://en.wikipedia.org/wiki/1829_in_rail_transport. Blast furnace chip worker (talk) 15:05, 26 August 2011 (UTC)[reply]

I see you have already posted it on the appropriate talk page. You could also ask on one of the help desks WP:RD.  Ronhjones  (Talk) 19:09, 26 August 2011 (UTC)[reply]
Thank you for posting to my page. It is outside my areas of expertise and not of much interest to me. In general go with the most authoritative source and then footnote that other reliable sources use a different date. If authoritative sources differ then mention both dates in the text and an explanation as to why:
"The race was run on either on August 18 or September 18, 1829 (sources differ)[1]"
At the top of may talk pages there are brown boxes to Wikiipeida project groups that have an interest in the subject in the case of Talk:Tom Thumb (locomotive) it is Wikipedia:WikiProject Trains so posting a question to Wikipedia talk:WikiProject Trains could present your question to experts in the subject. In this case I'll copy the question from my talk page to that page for you. -- PBS (talk) 21:28, 26 August 2011 (UTC)[reply]
Thank you. Blast furnace chip worker (talk) 06:40, 27 August 2011 (UTC)[reply]

Queenshill

[edit]

I only know a little bit about Cyrillic, but I think "Куиншил" is based on a misreading, with "sh" being assumed to be one sound, whereas the "s" and "h" are almost certainly part of two separate syllables. I think "Куинсхилл" is probably more accurate, although I know there are problems representing "h" in Cyrillic... isn't it sometimes turned into a "g"? Regarding "hill", I looked up Churchill on Russian wikipedia, and see he is down as "Черчилль", which suggests that there might have to be a "ь" at the end.

"[kwiːnz hɪl]" is probably the right one. I don't know if the "h" is elided locally.

That said, there are some odd local ways of saying various names, so I'm not 100% on this! --MacRusgail (talk) 14:44, 7 October 2011 (UTC)[reply]

MacRusgail! Your answer is factful and rich in content as always. Unfortunately there no links in your answer. It is too unfortunately that Forvo and Ainmean-Àite na h-Alba (AÀA) ~ Gaelic Place-Names of Scotland have no information about Queenshill. Well, I have to continue my search.
By the way. Because Churchill is down as "Черчилль" on Russian wikipedia does not make "hill" suggested that there might have to be a "ь" Soft sign at the end. The "ь" mustn't be in both Ukrainian and Russian variants of this word. Blast furnace chip worker (talk) 17:25, 7 October 2011 (UTC)[reply]
Thank you. I am aware that AÀA is a quango of sorts, but I find some of their material dubious, for various reasons (The fact they've only managed to produce a short list of names, in their several years of existence, is pretty telling. I've no doubt they're comfortably funded as well.) If you are determined to get to the bottom of this, you probably need to find a knowledgeable local. Some things the internet's pretty useless for, and I'm afraid this is one of them. --MacRusgail (talk) 16:30, 11 October 2011 (UTC)[reply]
I think my further investigaion leads me to find an answer to my quation. Here one can to see the alternative name of the place Queenshill, near Kirkcudbright which is Queen's Hill. There are many others "hill"s up there in the neighbourhoods. It might be the answer to the quation but to strengthen the matter I may be will go to establish contact with some local people or local authorities. I'll contact the Scots Pairlament if need be.
Well, while the answer to the quation about Quennshill seems to be almoust clear I'v got another problem. Now I need an explanation about pronunciation of the word Govan. Why one have to pronounce this word as [guvan] but not [govan]? Joking apart. I am serious. As I know “O” is never equale to “U”. I am going to wright an article about Govan. I will contact a man who put a transcription GUV-AN in the article too. Blast furnace chip worker (talk) 21:03, 11 October 2011 (UTC)[reply]

Stop edit warring at Ukraine

[edit]

Stop your POV pushing at Ukraine by changing the name of Ukraine's capital from Kiev to Kyiv. See the note at the top of that page about changing Kiev to Kyiv. Click on the link to read the discussion and consensus. It's not up to you to decide to change Kiev to Kyiv. --Taivo (talk) 20:41, 1 May 2012 (UTC)[reply]

John Smeaton

[edit]

John Smeaton to whom you found reference was a noted engineer. Your reference says that he erected cast iron bellows, not that he invented them. There were several inventions for new blowing methods in that period. The inventor is probably Isaac Wilkinson. Peterkingiron (talk) 20:25, 4 August 2013 (UTC)[reply]

George Parry

[edit]

If you want this sort of help from me, I think you should contact me off-WP at peterkingiron@blueyonder.co.uk. See:

  • Proceedings of South Wales INstitute of Engineers 1 (1858), 26-39.
  • WKV Gale, Iron and Steel (Longmans. London 1969), 52.
  • Day & McNeil, Biographical Dictionary of the History of Technology (Routledge, London 1996), 541. Peterkingiron (talk) 15:35, 17 August 2013 (UTC)[reply]

A page you started (Joseph Marshall (traveller)) has been reviewed!

[edit]

Thanks for creating Joseph Marshall (traveller), Blast furnace chip worker!

Wikipedia editor Animalparty just reviewed your page, and wrote this note for you:

Please add secondary works about the subject, rather than merely works he wrote.

To reply, leave a comment on Animalparty's talk page.

Learn more about page curation.

category name

[edit]

I would suggest that "blast furnace cooling system" is probably acceptable. However, I rather doubt that you have enough content on this to merit a category in WP Commons. I would suggest something that will have more scope to be populated. Peterkingiron (talk) 17:47, 24 January 2016 (UTC)[reply]

There is the c:Category:Blast furnaces steel shells, wich contains some files on this. But what about File:The intestines of the furnace.jpg, File:Duisburg (DerHexer) 2010-08-11 045.jpg, File:Landschaftspark Duisburg-Nord Heißwind-Ringleitung 8.JPG and meny others of this kind? Well, may be I am realy to create this category. Blast furnace chip worker (talk) 20:31, 24 January 2016 (UTC)[reply]

March 2018

[edit]

Information icon Please do not add or change content, as you did at Ukraine, without citing a reliable source. Please review the guidelines at Wikipedia:Citing sources and take this opportunity to add references to the article. Also, per WP:NPOV, it doesn't help for you to evince a partisan view. Wikipedia's articles speak in Wikipedia's voice and you do not have my consent to insert your words as if they were relevant. Chris Troutman (talk) 19:57, 20 March 2018 (UTC)[reply]

Please take a hint at Talk:Ukraine. Editors that argue there end up blocked. Chris Troutman (talk) 20:32, 20 March 2018 (UTC)[reply]

Information icon It may not have been your intention, but one of your edits, specifically one that you made on Ukraine, may have introduced material that some consider controversial. Due to this, your edits may have been reverted. When adding material that may be controversial, it is good practice to first discuss the changes on the article's talk page before making them, to gain consensus over whether or not to include the text, phrasing, etc. If you believe that the information you added was correct, please initiate that discussion. Thank you. Chris Troutman (talk) 20:52, 20 March 2018 (UTC)[reply]

Stop icon

Your recent editing history at Ukraine shows that you are currently engaged in an edit war. To resolve the content dispute, please do not revert or change the edits of others when you are reverted. Instead of reverting, please use the talk page to work toward making a version that represents consensus among editors. The best practice at this stage is to discuss, not edit-war. See BRD for how this is done. If discussions reach an impasse, you can then post a request for help at a relevant noticeboard or seek dispute resolution. In some cases, you may wish to request temporary page protection.

Being involved in an edit war can result in your being blocked from editing—especially if you violate the three-revert rule, which states that an editor must not perform more than three reverts on a single page within a 24-hour period. Undoing another editor's work—whether in whole or in part, whether involving the same or different material each time—counts as a revert. Also keep in mind that while violating the three-revert rule often leads to a block, you can still be blocked for edit warring—even if you don't violate the three-revert rule—should your behavior indicate that you intend to continue reverting repeatedly. Chris Troutman (talk) 21:12, 20 March 2018 (UTC)[reply]

Blast furnace chip worker (talk · contribs) - Please discuss this change on the talk page and reach consensus before attempting to redo this edit. --KNHaw (talk) 21:36, 20 March 2018 (UTC)[reply]

ArbCom 2018 election voter message

[edit]

Hello, Blast furnace chip worker. Voting in the 2018 Arbitration Committee elections is now open until 23.59 on Sunday, 3 December. All users who registered an account before Sunday, 28 October 2018, made at least 150 mainspace edits before Thursday, 1 November 2018 and are not currently blocked are eligible to vote. Users with alternate accounts may only vote once.

The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to impose binding solutions to disputes between editors, primarily for serious conduct disputes the community has been unable to resolve. This includes the authority to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail.

If you wish to participate in the 2018 election, please review the candidates and submit your choices on the voting page. MediaWiki message delivery (talk) 18:42, 19 November 2018 (UTC)[reply]

Ways to improve Crib dam

[edit]

Hello, Blast furnace chip worker,

Thanks for creating Crib dam! I edit here too, under the username Nick Moyes and it's nice to meet you :-)

I wanted to let you know that I have tagged the page as having some issues to fix, as a part of our page curation process and note that:-

Please cite some sources, and ensure you explain that crib dams can be built from other materials, such as reinfected concrete (at least, that's what a quick Google search told me).

The tags can be removed by you or another editor once the issues they mention are addressed. If you have questions, leave a comment here and prepend it with {{Re|Nick Moyes}}. And, don't forget to sign your reply with ~~~~ . For broader editing help, please visit the Teahouse.

Delivered via the Page Curation tool, on behalf of the reviewer.

Nick Moyes (talk) 21:17, 27 July 2019 (UTC)[reply]