User talk:CarloBurkhardtHSPF

February 2021[edit]

Hello, I'm Paper9oll. I noticed that you added or changed content in an article, 3D printing, but you didn't provide a reliable source. It's been removed and archived in the page history for now, but if you'd like to include a citation and re-add it, please do so. You can have a look at the tutorial on citing sources. If you think I made a mistake, you can leave me a message on my talk page. — Paper9oll (📣 • 📝) 11:00, 18 February 2021 (UTC)[reply]

Image without license[edit]

Unspecified source/license for File:Lithography-based Metal Manufacturing.png[edit]

Thanks for uploading File:Lithography-based Metal Manufacturing.png. The image has been identified as not specifying the copyright status of the image, which is required by Wikipedia's policy on images. Even if you created the image yourself, you still need to release it so Wikipedia can use it. If you don't indicate the copyright status of the image on the image's description page, using an appropriate copyright tag, it may be deleted some time after the next seven days. If you made this image yourself, you can use copyright tags like {{PD-self}} (to release all rights), {{self|cc-by-sa-4.0}} (to require that you be credited), or any tag here - just go to the image, click edit, and add one of those. If you have uploaded other images, please verify that you have provided copyright information for them as well.

For more information on using images, see the following pages:

This is an automated notice by MifterBot. For assistance on the image use policy, see Wikipedia:Media copyright questions. NOTE: Once you correct this, please remove the tag from the image's page. --MifterBot ^{(Talk • Contribs • Owner)} 11:45, 18 February 2021 (UTC)[reply]

Unspecified source/license for File:Metal Binder Jetting.png[edit]

Thanks for uploading File:Metal Binder Jetting.png. The image has been identified as not specifying the copyright status of the image, which is required by Wikipedia's policy on images. Even if you created the image yourself, you still need to release it so Wikipedia can use it. If you don't indicate the copyright status of the image on the image's description page, using an appropriate copyright tag, it may be deleted some time after the next seven days. If you made this image yourself, you can use copyright tags like {{PD-self}} (to release all rights), {{self|cc-by-sa-4.0}} (to require that you be credited), or any tag here - just go to the image, click edit, and add one of those. If you have uploaded other images, please verify that you have provided copyright information for them as well.

For more information on using images, see the following pages:

This is an automated notice by MifterBot. For assistance on the image use policy, see Wikipedia:Media copyright questions. NOTE: Once you correct this, please remove the tag from the image's page. --MifterBot ^{(Talk • Contribs • Owner)} 11:46, 18 February 2021 (UTC)[reply]

Unspecified source/license for File:BJ Flow Simulation.png[edit]

Thanks for uploading File:BJ Flow Simulation.png. The image has been identified as not specifying the copyright status of the image, which is required by Wikipedia's policy on images. Even if you created the image yourself, you still need to release it so Wikipedia can use it. If you don't indicate the copyright status of the image on the image's description page, using an appropriate copyright tag, it may be deleted some time after the next seven days. If you made this image yourself, you can use copyright tags like {{PD-self}} (to release all rights), {{self|cc-by-sa-4.0}} (to require that you be credited), or any tag here - just go to the image, click edit, and add one of those. If you have uploaded other images, please verify that you have provided copyright information for them as well.

For more information on using images, see the following pages:

This is an automated notice by MifterBot. For assistance on the image use policy, see Wikipedia:Media copyright questions. NOTE: Once you correct this, please remove the tag from the image's page. --MifterBot ^{(Talk • Contribs • Owner)} 13:00, 18 February 2021 (UTC)[reply]

Your submission at Articles for creation: Sinter-based additive manufacturing (July 10)[edit]

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reasons left by Deb were:

This submission reads more like an essay than an encyclopedia article. Submissions should summarise information in secondary, reliable sources and not contain opinions or original research. Please write about the topic from a neutral point of view in an encyclopedic manner.

This submission provides insufficient context for those unfamiliar with the subject matter. Please see the guide to writing better articles for information on how to better format your submission.

The comment the reviewer left was:

Lack of context makes the article difficult to read and understand and wording is too closely based on some of the sources.

Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

If you would like to continue working on the submission, go to Draft:Sinter-based additive manufacturing and click on the "Edit" tab at the top of the window.
If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Sinter-based additive manufacturing, click on the "Edit" tab at the top of the window, add "{{Db-g7}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
If you do not make any further changes to your draft, in 6 months, it will be considered abandoned and may be deleted.
If you need any assistance, or have experienced any untoward behavior associated with this submission, you can ask for help at the Articles for creation help desk, on the reviewer's talk page or use Wikipedia's real-time chat help from experienced editors.

Deb (talk) 09:15, 10 July 2021 (UTC)[reply]

Hello, CarloBurkhardtHSPF! Having an article declined at Articles for Creation can be disappointing. If you are wondering why your article submission was declined, please post a question at the Articles for creation help desk. If you have any other questions about your editing experience, we'd love to help you at the Teahouse, a friendly space on Wikipedia where experienced editors lend a hand to help new editors like yourself! See you there! Deb (talk) 09:15, 10 July 2021 (UTC)[reply]

Concern regarding Draft:Sinter-based additive manufacturing[edit]

Hello, CarloBurkhardtHSPF. This is a bot-delivered message letting you know that Draft:Sinter-based additive manufacturing, a page you created, has not been edited in at least 5 months. Drafts that have not been edited for six months may be deleted, so if you wish to retain the page, please edit it again or request that it be moved to your userspace.

If the page has already been deleted, you can request it be undeleted so you can continue working on it.

Thank you for your submission to Wikipedia. FireflyBot (talk) 10:02, 10 December 2021 (UTC)[reply]