User talk:Janek Kozicki
Write a new message (will show up at the bottom)
Welcome!
Hello, Janek Kozicki, and welcome to Wikipedia! Thank you for your contributions. I hope you like the place and decide to stay. Here are a few good links for newcomers:
- The five pillars of Wikipedia
- How to edit a page
- Help pages
- Tutorial
- How to write a great article
- Manual of Style
I hope you enjoy editing here and being a Wikipedian! Please sign your name on talk pages using four tildes (~~~~); this will automatically produce your name and the date. If you need help, check out Wikipedia:Where to ask a question, ask me on my talk page, or place {{helpme}}
on your talk page and someone will show up shortly to answer your questions. Again, welcome!
Atomic orbitals table
[edit]As you suggested, I started working on converting your monolithic Image:orbitals_table.png into a table of smaller atomic-orbital images. Check out Atomic orbital/orbitals table. Definitely nicer in my opinion. Not sure if it should go further and have a separate image for each m. DMacks 01:48, 6 April 2007 (UTC)
- wow, looks great, thanks :) Janek Kozicki 06:16, 6 April 2007 (UTC)
How to draw Figure 5.
[edit]Hi Janek Kozicki,
Thank you for writing this artical. I am interested in drawing the Figure 5. Would you please tell me how to do?
Thanks!
Jinsong
- Hi, which article, which figure? Janek Kozicki (talk) 16:23, 17 May 2008 (UTC)
Bresler-Pister yield criterion
[edit]The yield surface that you have plotted looks a bit strange. Please look at the Bresler Pister yield criterion page for pointers on equations for more reasonable looking surfaces. Bbanerje (talk) 00:55, 19 May 2008 (UTC)
- yeah, I totally agree. Problem is that I need this equation expressed in principal stresses s1,s2,s3. The C++ code to calculate it was following:
void viewer::generateScalarField() { using namespace std; for(int i=0;i<sizeX;i++) for(int j=0;j<sizeY;j++) for(int k=0;k<sizeZ;k++) { // calculate s1,s2,s3 from the position in 3D array scalarField // the origin of the coordinate system is in the center (sizeXYZ * 0.5) // and the 3D array scalarField represents a cube from -1.0 to 1.0 double s1 = (double)i/(double)sizeX*2.0-1.0; double s2 = (double)j/(double)sizeY*2.0-1.0; double s3 = (double)k/(double)sizeZ*2.0-1.0; // Bresler-Pister double c0=0.2; double c1=0.07; double c2=0.07; scalarField[i][j][k] = (1.0/sqrt(6.0)) * sqrt( pow(s1-s2,2)+pow(s2-s3,2)+pow(s3-s1,2) ) - c0 - c1*(s1+s2+s3) - c2*pow(s1+s2+s3,2); } }
- the surface which I'm plotting is where values in the 3D array
scalarField[i][j][k]
are ZERO. I've picked the values c0,c1,c2 in a way so that they show this surface in a best way (to see it whole instead of a part). As you see, the equation which I used is the one written here. All other surfaces were plotted in the same way (using the principal stresses equation). This could mean that this equation is incorrect, or I made a typo when I writing it into C++ code above (do you see a typo there?). Equations in Bresler Pister yield criterion need some transformations to express them in principal stresses, and I simply don't have time to transform them. - Concluding, if you (or anybody) can make the transofrmations and give that equation expressed in principal stresses I can plot the surface. For the time being please feel free to delete that part, or put another template there informing that it's very likely that it contains a mistake. Janek Kozicki
- Just for the record, plotting other surfaces involved only changing that single line
scalarField[i][j][k] = ....
- And here is the C++ code I used for each surface:
// Tresca Guest scalarField[i][j][k] = std::max(abs(s1-s2),std::max(abs(s2-s3),abs(s3-s1)))-0.2; /********************/ // Huber Mises Hencky scalarField[i][j][k] = pow(s1-s2,2)+pow(s2-s3,2)+pow(s3-s1,2)-0.2; /********************/ // Mohr-Coulomb double Rc = 0.8; double Rr = 0.5; double m=Rc/Rr; double K=(m-1.0)/(m+1.0); double c=Rc/(m+1.0); scalarField[i][j][k] = std::max(abs( (s1-s2)/2.0)-c+K*(s1+s2)/2.0 , std::max(abs( (s2-s3)/2.0)-c+K*(s2+s3)/2.0 , abs( (s3-s1)/2.0)-c+K*(s3+s1)/2.0 )); /********************/ // Drucker-Prager double Rc = 0.8; double Rr = 0.5; double m=Rc/Rr; double K = 2.0*Rc/(sqrt(3.0)*(m+1)); double alpha = (m-1.0)/(sqrt(3.0)*(m+1)); scalarField[i][j][k] = alpha*(s1+s2+s3) + sqrt((pow(s1-s2,2)+pow(s2-s3,2)+pow(s3-s1,2))/6.0)-K;
- Thanks for your work on Yield surface article! Janek Kozicki (talk) 19:43, 19 May 2008 (UTC)
- Hi Janek, I've added expressions for in the Bresler-Pister part of Yield surface. The shape of the yield surface depends strongly on these parameters and a non-convex yield surface is not very reasoanble (though some would disagree). Could you plug in some reasonable numbers for to calculate c0, c1, c2 (instead of using 0.2, 0.07, 0.07) and see what shapes you get for the yield surface? You should get an envelope that is convex. I'm working on the Willam-Warnke criterion and will add in some details in the next few days. Bbanerje (talk) 04:21, 21 May 2008 (UTC)
- Thanks, it looks much better now, that's the code I used:
- Hi Janek, I've added expressions for in the Bresler-Pister part of Yield surface. The shape of the yield surface depends strongly on these parameters and a non-convex yield surface is not very reasoanble (though some would disagree). Could you plug in some reasonable numbers for to calculate c0, c1, c2 (instead of using 0.2, 0.07, 0.07) and see what shapes you get for the yield surface? You should get an envelope that is convex. I'm working on the Willam-Warnke criterion and will add in some details in the next few days. Bbanerje (talk) 04:21, 21 May 2008 (UTC)
double sc=0.5; double st=0.2; double sb=0.4; double c1= ( (st-sc) / (sqrt(3)*(st+sc)) ) *( (4*sb*sb-sb*(sc+st)+sc*st) / (4*sb*sb+2*sb*(st-sc)-sc*st) ); double c2= ( 1/(sqrt(3)*(st+sc)) ) *( (sb*(3*st-sc)-2*sc*st)/( 4*sb*sb+2*sb*(st-sc)-sc*st ) ); double c0=sc/sqrt(3)+c1*sc-c2*sc*sc; scalarField[i][j][k] = (1.0/sqrt(6.0)) * sqrt( pow(s1-s2,2)+pow(s2-s3,2)+pow(s3-s1,2) ) - c0 - c1*(s1+s2+s3) - c2*pow(s1+s2+s3,2.0);
- Janek Kozicki (talk) 08:46, 21 May 2008 (UTC)
- Hi, I've added instructions on how to create the Willam-Warnke surface in the yield surface discussion page at Talk:Yield_surface#Willam-Warnke_surface. Thanks for your surface plots. Bbanerje (talk) 03:02, 25 May 2008 (UTC)
- Hi, you did a great deal of work. Thanks a lot. Have a look there for unexpected results. Janek Kozicki (talk) 19:03, 25 May 2008 (UTC)
- There's an updated version for you to play with at Talk:Yield_surface#Willam-Warnke_surface. Let's see how that goes. Bbanerje (talk) 01:00, 26 May 2008 (UTC)
- Hi, you did a great deal of work. Thanks a lot. Have a look there for unexpected results. Janek Kozicki (talk) 19:03, 25 May 2008 (UTC)
- Hi, I've added instructions on how to create the Willam-Warnke surface in the yield surface discussion page at Talk:Yield_surface#Willam-Warnke_surface. Thanks for your surface plots. Bbanerje (talk) 03:02, 25 May 2008 (UTC)
- Janek Kozicki (talk) 08:46, 21 May 2008 (UTC)
Update on Willam-Warnke
[edit]There was a mistake in the expression for rt in the original version. If should be
Note the + sign in the denominator on the right hand side. That, and a careful calculation of should fix the problem with the yield surface. Bbanerje (talk) 00:04, 28 May 2008 (UTC)
Notification of automated file description generation
[edit]Your upload of File:Bresler Pister Surface 2D.png or contribution to its description is noted, and thanks (even if belatedly) for your contribution. In order to help make better use of the media, an attempt has been made by an automated process to identify and add certain information to the media's description page.
This notification is placed on your talk page because a bot has identified you either as the uploader of the file, or as a contributor to its metadata. It would be appreciated if you could carefully review the information the bot added. To opt out of these notifications, please follow the instructions here. Thanks! Message delivered by Theo's Little Bot (opt-out) 14:09, 21 February 2014 (UTC)
- Another one of your uploads, File:Bresler Pister Yield Surface 3D.png, has also had some information automatically added. If you get a moment, please review the bot's contributions there as well. Thanks! Message delivered by Theo's Little Bot (opt-out) 14:10, 22 February 2014 (UTC)
how to draw the pictures you uploaded?
[edit]Hi Janek Kozicki !you upload so many pictures ,awesome! I wonder how to plot the pictures ?what graphic softwares can do this ? — Preceding unsigned comment added by 202.113.11.209 (talk) 03:28, 8 July 2015 (UTC)
Hi,
You appear to be eligible to vote in the current Arbitration Committee election. The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to enact binding solutions for disputes between editors, primarily related to serious behavioural issues that the community has been unable to resolve. This includes the ability to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail. If you wish to participate, you are welcome to review the candidates' statements and submit your choices on the voting page. For the Election committee, MediaWiki message delivery (talk) 13:10, 23 November 2015 (UTC)
Hi,
You appear to be eligible to vote in the current Arbitration Committee election. The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to enact binding solutions for disputes between editors, primarily related to serious behavioural issues that the community has been unable to resolve. This includes the ability to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail. If you wish to participate, you are welcome to review the candidates' statements and submit your choices on the voting page. For the Election committee, MediaWiki message delivery (talk) 13:33, 23 November 2015 (UTC)
ArbCom 2017 election voter message
[edit]Hello, Janek Kozicki. Voting in the 2017 Arbitration Committee elections is now open until 23.59 on Sunday, 10 December. All users who registered an account before Saturday, 28 October 2017, made at least 150 mainspace edits before Wednesday, 1 November 2017 and are not currently blocked are eligible to vote. Users with alternate accounts may only vote once.
The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to impose binding solutions to disputes between editors, primarily for serious conduct disputes the community has been unable to resolve. This includes the authority to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail.
If you wish to participate in the 2017 election, please review the candidates and submit your choices on the voting page. MediaWiki message delivery (talk) 18:42, 3 December 2017 (UTC)
Nomination of Displacement field (mechanics) for deletion
[edit]![](http://upload.wikimedia.org/wikipedia/en/thumb/5/5f/Ambox_warning_orange.svg/48px-Ambox_warning_orange.svg.png)
A discussion is taking place as to whether the article Displacement field (mechanics) is suitable for inclusion in Wikipedia according to Wikipedia's policies and guidelines or whether it should be deleted.
The article will be discussed at Wikipedia:Articles for deletion/Displacement field (mechanics) until a consensus is reached, and anyone, including you, is welcome to contribute to the discussion. The nomination will explain the policies and guidelines which are of concern. The discussion focuses on high-quality evidence and our policies and guidelines.
Users may edit the article during the discussion, including to improve the article to address concerns raised in the discussion. However, do not remove the article-for-deletion notice from the top of the article. » Shadowowl | talk 16:24, 25 July 2018 (UTC)
![Notice](http://upload.wikimedia.org/wikipedia/en/thumb/7/74/Ambox_warning_yellow.svg/48px-Ambox_warning_yellow.svg.png)
The file File:Drucker Prager Surface 2D.png has been proposed for deletion because of the following concern:
Orphaned graph/chart/diagram.
While all constructive contributions to Wikipedia are appreciated, pages may be deleted for any of several reasons.
You may prevent the proposed deletion by removing the {{proposed deletion/dated files}}
notice, but please explain why in your edit summary or on the file's talk page.
Please consider addressing the issues raised. Removing {{proposed deletion/dated files}}
will stop the proposed deletion process, but other deletion processes exist. In particular, the speedy deletion process can result in deletion without discussion, and files for discussion allows discussion to reach consensus for deletion. ~ Rob13Talk 18:04, 21 October 2018 (UTC)
![Notice](http://upload.wikimedia.org/wikipedia/en/thumb/7/74/Ambox_warning_yellow.svg/48px-Ambox_warning_yellow.svg.png)
The file File:Graph of diameter change in a rod, illustrating Poisson's ratio.png has been proposed for deletion because of the following concern:
orphaned raster image that was not used as a source to create the corresponding vector image, and thus is not needed for attribution purposes
While all constructive contributions to Wikipedia are appreciated, pages may be deleted for any of several reasons.
You may prevent the proposed deletion by removing the {{proposed deletion/dated files}}
notice, but please explain why in your edit summary or on the file's talk page.
Please consider addressing the issues raised. Removing {{proposed deletion/dated files}}
will stop the proposed deletion process, but other deletion processes exist. In particular, the speedy deletion process can result in deletion without discussion, and files for discussion allows discussion to reach consensus for deletion. HouseBlastertalk 01:31, 29 January 2022 (UTC)