Wikipedia:Picture peer review/Concave and Convex mirrors
Appearance
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/27/Concave_mirror.png/220px-Concave_mirror.png)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b6/A_diagram_representing_a_convex_mirror%2C_which_shows_its_focal_point%2C_focal_length%2C_center_of_curvature%2C_and_the_principal_axis.png/220px-A_diagram_representing_a_convex_mirror%2C_which_shows_its_focal_point%2C_focal_length%2C_center_of_curvature%2C_and_the_principal_axis.png)
![](http://upload.wikimedia.org/wikipedia/en/thumb/5/5f/Convex_mirror.svg/220px-Convex_mirror.svg.png)
Reasons of nomination:
- According to the standards page, the images are:
- Of High Quality
- Have a free license
- Add value to an article
- Accurate
- With good captions
- According to the same standards, the images might be:
- Wikipedia's best work
- pleasing to the eye
- However, also according to the standards, the images are not:
- of a high resolution
The image is approximately 450x450, but I believe it still does qualify under being a featured image because it is a diagram, and not a photo. It is also sharp, clear, and looks good.
What I want to be reviewed is: 1- is the resolution okay 2- is it considered wikipedia's bets work or pleasuring to the eye .. and therefore, should it be nominated as a featured picture or not.
Author: Myself User:Eshcorp
Pages they appear in: Curved mirror, but more could be added.
- Nominate and support. - Eshcorp 07:43, 19 August 2006 (UTC)
Comments:
- People are going to want svg. BrokenSegue 15:10, 19 August 2006 (UTC)
- I don't know if it could be done as svg.. at least not with the tools I use, is there a good vector drawing tool other than Inkscape that might provide more functionality? --Eshcorp 16:14, 19 August 2006 (UTC)
- One small mistake - "curvature" is misspelled. Also, I think showing multiple rays of light and their reflections would be better. See, for comparison, DrBob's lens diagrams (in svg). --Davepape 16:52, 19 August 2006 (UTC)
- I will fix the mistake and add examples. It may take a while though. --Eshcorp 17:29, 19 August 2006 (UTC)
- I've made an SVG version in Inkscape. I'm dabbling in things I know nothing about as usual, so let me know if anything needs to be changed on it and I'll get it sorted. If you like that I'll make a similar one for the concave mirror. Icey 21:44, 25 August 2006 (UTC)
Seconder: