Washington State Route 534
State Route 534 | ||||
|---|---|---|---|---|
 SR 534 is highlighted in red. | ||||
| Route information | ||||
| Auxiliary route of I-5 | ||||
| Maintained by WSDOT | ||||
| Length | 5.08 mi[1] (8.18 km) | |||
| Existed | 1964[2]–present | |||
| Major junctions | ||||
| West end |  I-5 in Conway | |||
| East end |  SR 9 in Lake McMurray | |||
| Location | ||||
| Country | United States | |||
| State | Washington | |||
| Highway system | ||||
| ||||
State Route 534 (SR 534) is a short Washington state highway located in Skagit County. The 5.08-mile (8.18 km) long route runs east from Interstate 5 (I-5) in Conway to SR 9 in Lake McMurray. The highway was first designated as a state-maintained highway in 1937, when it became Secondary State Highway 1H (SSH 1H) as part of the creation of the Primary and secondary state highways; SSH 1H later became SR 534 during the 1964 highway renumbering.
Route description[edit]
SR 534 begins at an interchange with I-5 in Conway, located near the mouth of the Skagit River east of Fir Island. The highway is a continuation of the Pioneer Highway, which travels south from Conway to Stanwood. SR 534 travels east and passes an elementary school before it ascends from the Skagit Valley into hilly terrain.[3] The highway travels southeast and reaches its eastern terminus at SR 9 in Lake McMurray.[4][5]
The two-lane rural highway primarily serves as a short connector between I-5 and SR 9.[3] SR 534 is maintained by the Washington State Department of Transportation (WSDOT), which conducts an annual survey of traffic volume that is expressed in terms of annual average daily traffic. Average traffic volumes on the highway in 2016 ranged from a minimum of 1,300 vehicles at SR 9 in Lake McMurray to a maximum of 8,300 vehicles at the I-5 interchange.[6]
History[edit]
The first highway that would later become SR 534 was Secondary State Highway 1H (SSH 1H), which was first designated in 1937.[7] The road ran from Primary State Highway 1 (PSH 1) in Conway to SSH 1A in Lake McMurray.[7] During the 1964 highway renumbering, SSH 1H became SR 534, PSH 1 became Interstate 5 (I-5) and SSH 1A became SR 9.[8]
The highway's western terminus in Conway was originally an intersection where several fatal collisions occurred during the 1960s.[9] Plans to replace the intersection with a grade-separated interchange were published by the state government in 1968 as part of improvements to I-5 to bring it to Interstate Highway standards.[10] Construction began in July 1969 and was expected to be completed within two years, but was delayed due to difficulty working with the soil over the winter months.[11] SR 534 was relocated to a new overpass at the completed interchange in 1971.[12]
Major intersections[edit]
The entire route is in Skagit County.
| Location | mi[1] | km | Destinations | Notes | |
|---|---|---|---|---|---|
| | 0.00 | 0.00 | I-5 – Seattle, Vancouver, B.C. | Continues west as Pioneer Highway | |
| | 5.08 | 8.18 | SR 9 – Sedro-Woolley, Arlington | ||
| 1.000 mi = 1.609 km; 1.000 km = 0.621 mi | |||||
References[edit]
- ^ a b Multimodal Planning Division (January 4, 2021). State Highway Log Planning Report 2020, SR 2 to SR 971 (PDF) (Report). Washington State Department of Transportation. p. 1638. Retrieved March 24, 2023.
- ^ Washington State Legislature. "RCW 47.17.765: State route No. 534". Retrieved June 9, 2009.
- ^ a b "Corridor Sketch Summary – SR 9 & SR 534: SR 530 Jct (Arlington) to SR 20 Jct (Sedro-Woolley) & I-5 Jct (Conway)" (PDF). Washington State Department of Transportation. October 28, 2019. pp. 1–2. Retrieved March 24, 2023.
- ^ Google (March 24, 2023). "State Route 534" (Map). Google Maps. Google. Retrieved March 24, 2023.
- ^ Skagit County: Mount Vernon, Anacortes (Map) (2004 ed.). City Street Maps. G. M. Johnson. 2004. § AR 36, 37, 38, 39, 40; AS 40, 41, 42, 43; AT 43, 44; AU 44, 45. ISBN 1-894570-90-1. Retrieved June 9, 2009.
- ^ 2016 Annual Traffic Report (PDF) (Report). Washington State Department of Transportation. 2017. p. 208. Archived from the original (PDF) on February 8, 2020. Retrieved March 24, 2023.
- ^ a b Washington State Legislature (March 18, 1937). "Chapter 207: Classification of Public Highways". Session Laws of the State of Washington (1937 ed.). Olympia, Washington: Washington State Legislature. pp. 995–996. Retrieved June 9, 2009.
(h) Secondary State Highway No. 1H; beginning at Conway on Primary State Highway No. 1, thence in a southeasterly direction by the most feasible route to McMurray on Secondary State Highway No. 1A.
- ^ C. G. Prahl (December 1, 1965). "Identification of State Highways" (PDF). Washington State Highway Commission, Department of Highways. Retrieved June 9, 2009.
- ^ "Conway Interchange Improvements Planned". The Bellingham Herald. August 8, 1967. p. 10. Retrieved March 24, 2023 – via Newspapers.com.
- ^ "Conway Interchange Plans Under Review". The Bellingham Herald. January 19, 1968. p. 7. Retrieved March 24, 2023 – via Newspapers.com.
- ^ "Conway interchange job resumes after delays". The Bellingham Herald. April 22, 1971. p. 2. Retrieved March 24, 2023 – via Newspapers.com.
- ^ "The People of Interstate 5". Washington Highway News. Vol. 23, no. 1. Washington State Department of Highways. February 1972. p. 19. OCLC 29654162. Retrieved September 12, 2018 – via WSDOT Library Digital Collections.
